Challenge: What if carbide tools do not work with HRSA superalloys?Solution: Correct application of ceramic insert grades can be a powerful alternative. Sialon and whisker-reinforced ceramics are
Learn More >
The rolling mill is widely used in the metallurgical industry, and the roll as the main working part determines the efficiency of the rolling mill and the quality of the rolling material. Therefore, w
Learn More >
PDC bits PDC bit is the abbreviation of polycrystalline diamond compact bit (Polycrystalline Diamond Compact Bit) bit, also known as polycrystalline diamond cutting block bit or co
Learn More >
What are PCD and PCD Cutting Tools? PCD, Polycrystalline Diamond is a composite superhard material sintered by diamond micropowder and binder cobalt under high temperature and ultra-high pressure
Learn More >
Helix angle γ: Different models have different angles, generally 10°~40°. Margin: mainly plays the role of guiding and extrusion. Back: The part between the land and the
Learn More >
The performance and application of CBN insertsThe hardness of CBN inserts is much higher than that of ceramic inserts. Because of its high hardness, it is also called superhard material with diamond.&
Learn More >
Types and development of ceramic inserts The most obvious development line of the ceramic inserts is that the toughness of the inserts increases in turn: alumina ceramic inserts - composite alumi
Learn More >
The wafer is the basic raw material for the production and manufacture of semiconductor devices, extremely pure semiconductor materials through the process of pulling, slicing, and other processes to
Learn More >
