Single stroke honing reamer The single-stroke honing reamer uses electroplated and sintered diamond tools, and the honing machine goes back and forth in a single stroke to grind away the residual
Learn More >
PCD is a synthetic polycrystalline diamond.It is made of natural or synthetic diamond powder and binder (including cobalt, nickel, and other metals) in a certain proportion, sintered at high temperatu
Learn More >
Thermal spraying are widely used in metal surface strengthening, workpiece after thermal spraying, the surface hardness can reach 50 to 55 HRC, general high up to 70 HRC, and most of the coating on th
Learn More >
Due to the special lattice structure of natural diamond, its structure has strong binding force and directionality, so that diamond has extremely high mechanical properties. As a superhard tool materi
Learn More >
The cutting edge shape of the CBN insert mainly includes the edge land (edge length, edge width), the edge angle, the edge R, the wiper edge, etc. By analyzing these main elements and understan
Learn More >
Technological requirements of surface modification1. Selection of Diamond blank materials: natural crystal; CVD and HPHT monocrystal.The color of natural crystal and pureness are not necessary to be g
Learn More >
This article focuses on the advantages and disadvantages of using cobalt- and tungsten-based metal bonds in the manufacture of production honing sticks. Metal binders mainly include cobalt-based
Learn More >
PCD is sintered by specially treated diamond and a small amount of binder under high temperature and high pressure. The disordered arrangement of diamond grains gives PCD uniform, extremely high hardn
Learn More >
