Longitudinal turning is generally used for machining parts with deep grooves and 90° corner structures, which can only be machined by this process. Transverse turning is generally used for streamli...
Learn More >
The cutting edge of the tool after being sharpened by ordinary grinding wheel or diamond grinding wheel has microscopic gaps of different degrees (ie, tiny chipping and sawing). In the cutting process...
Learn More >
Aerospace split blisk processing program The blisk is one of the key parts of aero-engines, and it is usually divided into two types: split type and integral type. The split type blisks are mostl
Learn More >
A cutting tool in metal working can be defined as “any tool that is used to remove metal from the work piece by means of shear deformation”. Frequently, it also refers as a tool bit. In order to perfo...
Learn More >
The cutting area is too cold Materials such as mild carbon steel, stainless steel, and aluminum are highly viscous
Learn More >
* Check collet and collet * Minimize tool overhang * Use fewer teeth for cutting * Choose a larger tool diameter * For solid carbide end mills and replaceable head mills, select groove typ...
Learn More >
Mono-crystalline diamond die blanks can be used in hot drawing and cold drawing of various metal wires, with high quality polished surface and long service life.
Learn More >
(1). The rake angles may be positive, zero or negative. (2). An increased rake angle will reduce the strength of the cutting edge. (3). Rake angle affects the values of cutting angle and the ...
Learn More >
