How to reduce the impact of tools deformation? 1. Tools overhang should be as short as possible. 2. The diameter of handle should be as large as possible. 3. The radial cutting force of the t...
Learn More >
Alloy milling cutter in the use of more or less will encounter damage or wear problems, but sometimes it is inevitable. However, we can try our best to minimize the damage. There are few methods to re...
Learn More >
CBN tool, a kind of super hard tool, is made of CBN powder as raw material, under the action of a small amount of binder using ultra-high temperature and high pressure technology. Because the CBN tool...
Learn More >
CBN (cubic boron nitride) is a kind of hardness is second only to diamond (diamond), is after synthetic diamond, the soft of hexagonal boron nitride (white ink) joined shift catalysts in ultra high te...
Learn More >
Indexable inserts is a kind of cutting tool which clamps a polygonal blade with several cutting edges in advance on the tool body by mechanical clamping method. When a cutting edge is blunt in the pr...
Learn More >
Under normal circumstances, the brake discs should be replaced every 60,000 to 80,000 kilometers. Brake discs are vulnerable parts in the car's braking system. As the mileage of the car increases, the...
Learn More >
Because of the large brittleness of single crystal diamond tool and the sharp edge, it is easy to collapse when impacted, so it should be used as far as possible under smooth and non-vibration working...
Learn More >
The manufacturing process of diamond tool is confidential at home and abroad, but the process is basically the same, one of the main processes is that the tool must go through crystal orientation befo...
Learn More >
