Product advantages:
high wear resistance, the service life of cemented carbide is 80-180 times
High grinding accuracy, up to micron level
High hardness, good wear resistance
It has good thermal conductivity
Application:
precision workpiece top car, top grinding processing use;
Supporting high-end precision testing equipment.
The top of the diamond is made of diamond polycrystalline material, which is inlaid on the top matrix by special technical means, and the top matrix is made of high strength steel.Through the production of high-end processing equipment, skilled high-end technical workers operation, precision detection means to ensure.Is a high precision high-tech content products.
Specification:
|
Type |
d2 |
d4 |
L1 |
L2 |
L2-L1 |
|
Full Centre |
12.2 |
7 |
53.5 |
80 |
26.5 |
|
18 |
7 |
64 |
100 |
36 |
|
|
24.1 |
11 |
81 |
125 |
44 |
|
|
34.6 |
14 |
102.5 |
160 |
57.5 |
|
|
44.7 |
15.8 |
129.5 |
200 |
70.5 |
| Type |
d2 |
d4 |
h1 |
L3 |
L1 |
L2 |
L2-L1 |
|
Half Centre |
12.2 |
7 |
1.5 |
22 |
53.5 |
80 |
26.5 |
|
18 |
7 |
2 |
30 |
64 |
100 |
36 |
|
|
24.1 |
11 |
3 |
38 |
81 |
125 |
44 |
|
|
34.6 |
14 |
5 |
50 |
102.5 |
160 |
57.5 |
|
|
44.7 |
15.8 |
7 |
63 |
129.5 |
200 |
70.5 |
|
Type |
d2 |
d4 |
L3 |
Thread |
L1 |
L2 |
L2-L1 |
|
Thread Centre |
12.2 |
7 |
22 |
M16*1.5 |
53.5 |
80 |
26.5 |
|
18 |
7 |
30 |
M22*1.5 |
64 |
100 |
36 |
|
|
24.1 |
11 |
38 |
M27*1.5 |
81 |
125 |
44 |
|
|
34.6 |
14 |
50 |
M36*1.5 |
102.5 |
160 |
57.5 |
|
|
44.7 |
15.8 |
63 |
M48*1.5 |
129.5 |
200 |
70.5 |
Diamond center specification dimension table
|
|
||||||
|
model |
taper |
L(mm) |
D(mm) |
a(half-angle) |
D(mm) |
dl |
|
MS1-6S |
1:20.047 |
80 |
12.065 |
1°25′43″ |
6 |
0 |
|
MS2-6S |
1:20.020 |
100 |
17.78 |
1°25′50″ |
6 |
0 |
|
MS2-8S |
1:20.020 |
100 |
17.78 |
1°25′50″ |
8 |
1 |
|
MS3-6S |
1:19.922 |
125 |
23.825 |
1°26′16″ |
6 |
0 |
|
MS3-8S |
1:19.922 |
125 |
23.825 |
1°26′16″ |
8 |
1 |
|
MS3-10S |
1:19.922 |
125 |
23.825 |
1°26′16″ |
10 |
1.7 |
|
MS4-6S |
1:19.254 |
160 |
31.267 |
1°19′15″ |
6 |
0 |
|
MS4-8S |
1:19.254 |
160 |
31.267 |
1°19′15″ |
8 |
1 |
|
MS4-10S |
1:19.254 |
160 |
31.267 |
1°19′15″ |
10 |
1.7 |
|
MS4-12S |
1:19.254 |
160 |
31.267 |
1°19′15″ |
12 |
3.5 |
|
MS4-15S |
1:19.254 |
160 |
31.267 |
1°19′15″ |
15 |
4.2 |
|
MS5-6S |
1:19.002 |
200 |
44.399 |
1°19′15″ |
6 |
0 |
|
MS5-8S |
1:19.002 |
200 |
44.399 |
1°19′15″ |
8 |
1 |
|
MS5-10S |
1:19.002 |
200 |
44.399 |
1°19′15″ |
10 |
1.7 |
|
MS5-12S |
1:19.002 |
200 |
44.399 |
1°19′15″ |
12 |
3.5 |
|
MS5-15S |
1:19.002 |
200 |
44.399 |
1°19′15″ |
15 |
4.2 |
|
The concentricity of all diamond tip ≤0.003 mm, which is very suitable for top grinding of high-precision shaft products with high hardness such as hardened steel, alloy and ceramics. |
||||||
|
Other non-standard tip, half-tip can be customized production |
||||||
Meanwhile, we also provide the Co-based poly-crystalline diamond for making dead centres, such as size 6*10,8*10, 10*10, 10*12,15*15 in cylinder and conical shape.
