Gravure Engraving Stylus - Diamond Tool Solution for Gravure Platemaking
Product Overview
Gravure Engraving Stylus are precision tools used for gravure plate making. The cutter head is made of precision diamond, which is highly hard and durable.
In the gravure platemaking process, Gravure Engraving Stylus are used to engrave fine lines and mesh cells on the plate roller. It is installed on the engraving head of the electronic engraving machine. When it vibrates at a high frequency, it will engrave mesh cells on the copper surface to form the desired image or pattern.
The hardness and sharpness of the diamond of the Gravure Engraving Stylus enable it to perform fine and stable engraving, ensuring the restoration of complex designs and high-resolution images.
In the platemaking industry, the plate roller processed with high-precision Gravure Engraving Stylus achieves high-quality and efficient printing in applications such as packaging, labels, magazines, and commerce.
Our products comply with ISO standards and are compatible with mainstream electro-engraving equipment such as HELL series, DYM, Apollo, etc.
Core product features
Superhard materials and precision technology
- Diamond blade: Vickers hardness > 8000 HV, wear resistance improved by 30%
- Exclusive PISA process: ensure cell symmetry error < 0.5μm
- Blade passivation technology: surface crack incidence reduced by 65%
Intelligent production system
- Fast delivery: 15-day standard cycle, support urgent order expediting
- Full process quality control: equipped with ZEISS three-coordinate measuring instrument and other testing equipment
- Traceability system: Each Gravure Engraving Stylus is equipped with an independent serial code
Industry application scenarios
✔ Packaging printing
- Food/pharmaceutical soft packaging gravure printing
- Metallized film special printing
✔ Commercial printing
- Magazine high-line image (200-300 lpi)
- Anti-counterfeiting label microtext engraving
✔ Industrial application
- Decorative paper texture embossing
- Building material surface coating plate making
Customer value proposition
▶ Improved printing quality
- Achieve 1% stable dot reproduction
- Color transition levels increased by 20%
▶ Production cost optimization
- Service life extended to 3 million impacts
- Needle change frequency reduced by 40%
▶ Operational safety guarantee
- Electroplated non-slip handle design
- Special cleaning tool set
Use and maintenance guide
✦ Installation specification
- Use anti-static tweezers for operation
- Torque control range: 0.15-0.25N·m
✦ Cleaning suggestions
- Recommended cleaning agent: 99.7% pure alcohol
- Compressed air purging is prohibited
✦ Fault prevention
- Regularly check the engraving head bearing clearance (recommended every 500 hours)
- Establish a copper plate surface hardness detection process
Why choose Moresuperhard?
- Industry certification: Passed SGS wear resistance test certification
- Technical support: Provide engraving parameter optimization solutions
- After-sales guarantee: 72-hour global emergency response
- Customized service: Support non-standard blade angle customization
The following reasons may cause the Gravure Engraving Stylus to be damaged:
1. During the operation, the diamond cutting edge may encounter hard particles in copper, plate roller grinding residue (abrasive particles) or copper pores (cavities), etc., which may cause damage to the cutting edge.
2. Although diamond has high hardness and strength, using a brush or fingers to directly clean the surface of the Gravure Engraving Stylus may cause damage to the cutting edge, making the Gravure Engraving Stylus unusable.
3. Blowing the Gravure Engraving Stylus with compressed air will also cause the same risk, because a hard particle or even dust hitting the blade at high speed will cause damage to the blade.
4. In addition, compressed air may also blow copper chips into the bearings of the engraving head system, causing mechanical failure and negatively affecting the Gravure Engraving Stylus.
|
Product |
Specification |
Product |
Specification |
|
HELL Engraving Styli-4K Standard PISA Type |
90° |
OHIO B700 Series Engraving Styli |
90° |
|
100° |
100° |
|
105° |
105° |
|
110° |
110° |
|
115° |
115° |
|
120° |
120° |
|
125° |
125° |
|
130° |
130° |
|
135° |
135° |
|
140° |
140° |
|
145° |
145° |
|
150° |
150° |
|
160° |
160° |
|
HELL Engraving Styli-8K Standard PISA Type |
90° |
OHIO M800 Series Engraving Styli |
90° |
|
100° |
100° |
|
105° |
105° |
|
110° |
110° |
|
115° |
115° |
|
120° |
120° |
|
125° |
125° |
|
130° |
130° |
|
135° |
135° |
|
140° |
140° |
|
145° |
145° |
|
150° |
150° |
|
160° |
160° |
|
12HZ Engraving Styli |
90° |
OHIO GS Engraving Styli |
90° |
|
100° |
100° |
|
105° |
105° |
|
110° |
110° |
|
115° |
115° |
|
120° |
120° |
|
125° |
125° |
|
130° |
130° |
|
135° |
135° |
|
140° |
140° |
|
145° |
145° |
|
150° |
150° |
|
160° |
160° |
|
HELL series gravure printing plate making tools are used on HELL electronic engraving machines or similar models. Commonly used models include: MDC, HELL-K5, HELL-K6, HELL-K50, HELL-K500, HELL-K500 double head, HELL-K800 double head, etc. Tools can also be customized according to demand |
OHIO series gravure plate making tools are commonly used on OHIO electronic engraving machines or similar models. Commonly used models include: OHIOB700, OHIO M800, GS series, etc. Tools can also be customized according to needs |
