PCD is more suitable for processing materials: It is suitable for processing non-ferrous metals and non-metals and has good cutting ability for all non-ferrous metals and their alloys such as coppe...
Learn More >
In order to avoid the BUE and work hardening, the cutting edge must be sharp and the cutting edge must be smooth. PCD tool just meets all these requirements. Machining such material requires high wear...
Learn More >
The honing process is conducive to oil lubrication, so its surface texture characteristics are good, and honing deformation layer is very thin, with less heat, and the surface is not easy to burn.
Learn More >
Diamond honing reamer cylindrical surface coated with diamond abrasives grinding the hole wall, reamer taper sleeve, and tool rod for small taper, change the matching position can change the reamer di...
Learn More >
The pcd inserts include milling inserts, turning inserts, chip breaker PCD inserts, non-standard PCD inserts, etc. There are rake angles, rear angles, flat angles, and chip breakers.
Learn More >
More SuperHard can produce both CVD and MCD single-crystal tools. CVD tools are expensive to manufacture. If you only need to process mirror surfaces, MCD tools can fully meet customer needs. In the ...
Learn More >
Most of the acrylic is a transparent product, which has higher requirements for the finish of the acrylic. If you want to process better high-gloss requirements, you need to use PCD cutting tools. PC...
Learn More >
Recently, an American customer asked us about single crystal cutting tools for processing 6061 aluminum used in the semiconductor industry. Since the semiconductor industry is a relatively precis
Learn More >
