Suitable for monocrystalline silicon and quartz Ceramics, etc. are fragile and difficult to process Material drilling.
Learn More >
In order to process the workpiece reasonably and choose the milling cutter, it is necessary to analyze the shape, size, material hardness and other conditions of the workpiece.
Learn More >
Powdered HSS material is used for machining common alloy steel rotors. Hard alloy is used to process high temperature alloy, titanium alloy and other difficult to process rotor materials. Coarser cu...
Learn More >
A reamer with one or more cutters is a rotary tool used to remove a thin layer of metal on the surface of the machined hole. It is mainly used for finishing drilling (or reaming) after the hole, so th...
Learn More >
PCD cutter processing case
Learn More >
Aviation structural parts have a wide variety and complex structure; in addition, because aviation structural parts are mostly thin-walled parts, the material removal rate is large, and the processing...
Learn More >
Generally, when the lathe is used for machining, the so-called "vibration knife" will occur on the following occasions: Using the forming blade for forming turning; Outer turning of slender round...
Learn More >
Inner hole turning, also called boring, is the method of turning to expand the inner hole of the workpiece or processing the inner surface of the hollow workpiece, can be used to process most of the o...
Learn More >
